Email: info@cotecprotectivecoatings.co.uk Tel: 08081231214 Mob: 07780808282 Mob: 07421030221
Imprinted ConcreteCleaning Glasgow
Pattern Imprinted Concrete Cleaning & Sealing Glasgow
Repairs
BEFORE
AFTER
The Cleaning & Sealing of imprinted concrete driveways protects the concrete by providing a protective wear coat. Sealing your driveway will prevent contaminates such as oil or petrol and
minimise the growth of algae and moss. If you have pattern imprinted concrete, you should always ensure that the driveway is sealed every 3-4 years to keep it looking at its best.
Pattern Imprinted Concrete Ayrshire
Pattern Imprinted Concrete Cleaning & Sealing imprinted Concrete the restoration process.
Step 1: The drive is pressure cleaned using a rotary unit or turbo unit to remove dirt moss or algae. If the drive is oil stained, we can treat this area to remove the oil prior to cleaning.
Step 2: Pattern Imprinted Concrete often develops cracks chips which can be repaired however these blemishes might not always be invisible but will still be a vast improvement.
Step 3: We apply a blend of repair fluid-sealer and colour restorer in coat 1 this is followed by several coats of sealer and colour restorer to the desired effect is reached. A final coat of clear
sealer is applied to finish the process. if required expansion gaps can be filled with silicone.
Pattern Imprinted Concrete Maintenance
Pattern Imprinted concrete should be cleaned and re-sealed every 3-4 years the maintenance
process is as follows.
Step 1: The drive is pressure cleaned using a rotary unit or turbo unit to remove dirt moss or algae.
Step 2: A blend of repair fluid and clear sealer is applied in coat 1. A coat of clear sealer follows this.
It is unusual that an additional coat of sealer will be require but will be applied if the desired effect is
not reached.
The photos to the right show a drive that has not lost any colour just some lustre so a few coats of
sealer brings the drive back to that new look again.
Pattern Imprinted Concrete Rejuvenation
Over the years pattern imprinted concrete will fade losing colour and lustre and will also gather dirt from everyday use. Thus, it does require continual maintenance to keep the drive looking
pristine. However, with our busy lives we may have overlooked the drive and don’t really notice until it is to late as without continual maintenance or if poorly laid can crack,crumble and
larger section can sometimes break off as in the picture. Imprinted concrete can be repair although the repairs may not be completely invisible but can improve the driveway appearance
immensely as seen in the before and after pictures. This then becomes a restoration task to bring the drive back to that new look again. We can re-colour repair and reseal your pattern
imprinted concrete which will rejuvenate your drive.
Imprinted Concrete Cleaning
BEFORE
AFTER
Imprinted Concrete Driveway Transformation.
The works in the pictures below required two days to complete. The driveway was cleaned then sealed and had some minor concrete repairs. The sealing process required 2 coats of
gloss imprinted sealer with some colour tint. Sealer are available in matts and gloss always remember that a newly sealed driveway will be slippy in the wet more so with a gloss finish, you
can add anti-slip but this will give a satin finish to the gloss.
Gloss Finish
Email: info@cotecprotectivecoatings.co.uk
Tel:0808 123 1214 Mob: 07421030221
Imprinted Concrete Cleaning Glasgow
Imprinted ConcreteCleaning Glasgow
BEFORE
AFTER
The Cleaning & Sealing of imprinted concrete
driveways protects the concrete by providing a
protective wear coat. Sealing your driveway will
prevent contaminates such as oil or petrol and
minimise the growth of algae and moss. If you have
pattern imprinted concrete, you should always ensure
that the driveway is sealed every 3-4 years to keep it
looking at its best.
Pattern Imprinted Concrete Ayrshire
Pattern Imprinted Concrete Cleaning &
Sealing imprinted Concrete the restoration
process.
Step 1: The drive is pressure cleaned using a rotary
unit or turbo unit to remove dirt moss or algae. If the
drive is oil stained, we can treat this area to remove
the oil prior to cleaning.
Step 2: Pattern Imprinted Concrete often develops
cracks chips which can be repaired however these
blemishes might not always be invisible but will still
be a vast improvement.
Step 3: We apply a blend of repair fluid-sealer and
colour restorer in coat 1 this is followed by several
coats of sealer and colour restorer to the desired
effect is reached. A final coat of clear sealer is
applied to finish the process. if required expansion
gaps can be filled with silicone.
Pattern Imprinted Concrete Maintenance
Pattern Imprinted concrete should be cleaned and re-
sealed every 3-4 years the maintenance process is as
follows.
Step 1: The drive is pressure cleaned using a rotary
unit or turbo unit to remove dirt moss or algae.
Step 2: A blend of repair fluid and clear sealer is
applied in coat 1. A coat of clear sealer follows this.
It is unusual that an additional coat of sealer will be
require but will be applied if the desired effect is not
reached.
The photos to the right show a drive that has not lost
any colour just some lustre so a few coats of sealer
brings the drive back to that new look again.
Pattern Imprinted Concrete Rejuvenation
Over the years pattern imprinted concrete will fade
losing colour and lustre and will also gather dirt from
everyday use. Thus, it does require continual
maintenance to keep the drive looking pristine.
However, with our busy lives we may have overlooked
the drive and don’t really notice until it is to late as
without continual maintenance or if poorly laid can
crack,crumble and larger section can sometimes
break off as in the picture. Imprinted concrete can be
repair although the repairs may not be completely
invisible but can improve the driveway appearance
immensely as seen in the before and after pictures.
This then becomes a restoration task to bring the
drive back to that new look again. We can re-colour
repair and reseal your pattern imprinted concrete
which will rejuvenate your drive.
Imprinted Concrete Cleaning
BEFORE
AFTER
Imprinted Concrete Driveway Transformation.
The works in the pictures below required two days to
complete. The driveway was cleaned then sealed
and had some minor concrete repairs. The sealing
process required 2 coats of gloss imprinted sealer
with some colour tint. Sealer are available in matts
and gloss always remember that a newly sealed
driveway will be slippy in the wet more so with a
gloss finish, you can add anti-slip but this will give a
satin finish to the gloss.
Gloss Finish
